The regeneration method of desulfurizer is as follows: take out the deactivated desulfurizer, spread it evenly and loosely in a flat, clean, sunny and ventilated place, and often turn the desulfurizer to make it fully contact with the air for oxidation regeneration.
沼氣脫硫 - 脫硫技術特點：
Characteristics of biogas desulfurization desulfurization technology:
1、天然氣凈度可根據實際需要調節，可以平穩的控制煤氣中的H2S的含量。
1. The purity of natural gas can be adjusted according to the actual needs, and the content of H2S in the gas can be controlled smoothly.
2. Compared with dry desulfurization, although the investment is 2-3 times of that of dry desulfurization, the operation cost is low. The actual desulfurization cost of 1000nm? Is about 4 yuan, which avoids the production cost increase of dry desulfurization system due to poor desulfurization effect after regeneration of desulfurizer and sulfur adsorption.
3. It has the characteristics of stable operation, safe operation and high desulfurization efficiency. The desulfurization efficiency can reach more than 97%, and the content of H2S in the gas after desulfurization is less than 50mg / Nm3.
4. If the desulfurization catalyst is PDS or '888', not only H2S can be removed, but also some organic sulfur which accounts for about 10% of the total sulfur in the gas can be removed.
濕法天然氣脫硫技術適用范圍：
Application scope of wet natural gas desulfurization technology:
適用于各種煤氣、沼氣和天然氣的脫硫(H2S)。
It is suitable for desulfurization (H2S) of gas, biogas and natural gas.
企業二維碼
2020-07-15
魯公網安備37011202000764號號