The sulfur in biogas mainly exists in the form of H2S and contains less organic sulfur. There are many ways to remove hydrogen sulfide, which can be generally divided into dry desulfurization, wet desulfurization and biological desulfurization.
Wet desulfurization uses a specific solvent to contact with the gas countercurrent to remove H2S. The solvent is re absorbed after regeneration. According to different absorption mechanisms, it is divided into chemical absorption method, physical absorption method, physical chemical absorption method and wet oxidation method. Wet oxidation method has high desulfurization efficiency, recyclable elemental sulfur, simple process, regeneration of most desulfurizers and low operation cost; At the same time, this method has complex process, large investment and is suitable for occasions with large gas treatment capacity and high H2S content.
Dry desulfurization is usually used for low sulfur gas treatment, especially for fine gas desulfurization. Most dry desulfurization processes cannot continue to operate due to the need to replace the desulfurizer. There are some dry processes such as manganese ore process, zinc oxide process, iron oxide, activated carbon, etc. the desulfurizer cannot be regenerated or the regeneration times are few. After desulfurization is saturated, it will be discarded, which will cause environmental problems on the one hand and increase the desulfurization cost on the other hand.
Based on the capacity of various microorganisms, biological desulfurization system uses the life activities of microorganisms to convert organic pollution into compounds harmless to human health and ecological environment. Biological method is often used to produce sulfide in sewage treatment projects. Biological desulfurization technology includes biological filtration, biological adsorption and biological trickle filtration. The three systems are open systems, and their microbial populations change with the change of environment. In the process of biological desulfurization, the oxidized sulfur-containing pollutants need to be removed by first generating sulfide or H2S through biological reduction, and then generating elemental sulfur through biological oxidation.
The wonderful contents of this article are provided by the knowledge of biological desulfurization. There are many wonderful contents on this website. You can click to enter more contents: http://lhgdst.com We have special customer service to answer your questions
企業二維碼
2022-05-19
魯公網安備37011202000764號號